Part Numbers

Brand New Unit
10’ Shielded Cable/Connector Pre-made
Free Ground Shipping

FLDK 110C1003/S42
Baumer Part number 10152352

FLDK 110G1005/S14
Baumer Part number 10164310

FLDK 110G1003/S14
Baumer Part number 10151988

FLDK 110G1006/S14
Baumer Part number 11040147

FLDK 110G1003/S42
Baumer Part number 10152351


  • High sensitivity Paper thickness down to 0,2 mm can be easily detected.
  • High counting rate Up to 600,000 copies per hour are possible.
  • Settings The sensor can be optimized via dip-switch.
  • Easy to mount The sensor is mounted parallel to the conveyor at a 40 mm distance.

Baumer Electric is proud to introduce the SCATEC-2 Laser “Copy Counter”, a member of the SCATEC-family of non-contact laser-based sensors, designed to count newspapers, magazines and other printed matter in a lap or shingle stream.

The SCATEC-2 detects sheets down to a thickness of 0,2 mm at up to 600,000 pieces per hour. The sensor is adjustable via a simple dip-switch.


Specification: Baumer Electric Laser “Copy Counter” — SCATEC-2

Range: 0…60 mm below the sensor Sensitivity single sheet detection down to 0,2 mm* are recognized in the range of 37…43 mm below the sensor (* test object: neatly cut, matte white paper)
Color insensitivity: multi colored objects like magazines and other printed objects with a color range from black to shiny white are recognized, even if the bright / dark transitions are near to the edge Recommended mounting: parallel, to the conveyer belts and 40 mm above them
Counting rate: max. 600‘000 copies/h Object speed: 0…2 m/s for > 0,3 mm edges0…1 m/s for > 0,2 mm edges
Distance between objects: min. 1 mm at speed 0,2 m/smin. 5 mm at speed 1 m/s Stream condition: folded edge leading, in certain cases also cut edge leading
Multiple pulse suppression: via microprocessor, 3 program options Light source: laserdiode 670 nm, visible red, mean output power < 0,3 mW, laser class 2
Voltage supply range +Vs 10 – 30 VDC Max supply current 150 mA
Output: push-pull (FLDK 110G1003/S14 / FLDK 110G1003/S42) opto isolated, open collector output (FLDK 110C1003/S14 / FLDK 110C1003/S42) Output pulse duration: 5, 10, 15 and 20 ms selectable
Connector: M12 x 1 or DIN 45322 Connector output: 1x DIN 45322, 6 pin, for sensor operation, connector is supplied (part number 104236)1x DIN 45322, 8 pin, interfaces
Housing dimensions:  110x50x30 mm Housing material: plastic (PBTP)
 Weight: approx. 130 g Temperature range: 0…+50 °C (non condensing)
Protection class:  IP 54